LHL10NB682J [TAIYO YUDEN]

General Purpose Inductor, 6800uH, 5%, 1 Element, Ferrite-Core, RADIALLEADED;


型号：	LHL10NB682J
厂家：	TAIYO YUDEN (U.S.A.), INC
描述：	General Purpose Inductor, 6800uH, 5%, 1 Element, Ferrite-Core, RADIALLEADED 大电流电感器测试
文件：	总17页 (文件大小：667K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

[ For General Electronic Equipment

(General Environment) ]

Notice for TAIYO YUDEN Products

Please read this notice before using the TAIYO YUDEN products.

REMINDERS

■ Product information in this catalog is as of October 2017. All of the contents speciﬁed herein are subject to change

without notice due to technical improvements, etc. Therefore, please check for the latest information carefully

before practical application or use of our products.

Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or

equipment incorporating our products, which are caused under the conditions other than those speciﬁed in this

catalog or individual product speciﬁcation sheets.

■ Please contact TAIYO YUDEN for further details of product speciﬁcations as the individual product speciﬁcation

sheets are available.

■ Please conduct validation and verification of our products in actual condition of mounting and operating

environment before using our products.

■ The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA

equipment, home electric appliances, office equipment, information and communication equipment including,

without limitation, mobile phone, and PC) and medical equipment classiﬁed as Class I or II by IMDRF. Please be

sure to contact TAIYO YUDEN for further information before using the products for any equipment which may

directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,

automotive powertrain control system, train control system, and ship control system, traffic signal equipment,

disaster prevention equipment, medical equipment classified as Class III by IMDRF, highly public information

network equipment including, without limitation, telephone exchange, and base station).

Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,

aerospace equipment, aviation equipment*, medical equipment classiﬁed as Class IV by IMDRF, nuclear control

equipment, undersea equipment, military equipment).

*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,

in-ﬂight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements speciﬁed separately by TAIYO YUDEN.

Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.

When our products are used even for high safety and/or reliability-required devices or circuits of general electronic

equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to

install a protection circuit as necessary.

Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way

responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog

for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.

■ Information contained in this catalog is intended to convey examples of typical performances and/or applications

of our products and is not intended to make any warranty with respect to the intellectual property rights or any

other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.

■ Please note that the scope of warranty for our products is limited to the delivered our products themselves and

TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.

Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality

assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in

accordance with such agreement.

■ The contents of this catalog are applicable to our products which are purchased from our sales offices or

authorized distributors (hereinafter“TAIYO YUDENs’ofﬁcial sales channel”). Please note that the contents of this

catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’s official sales

channel.

■ Caution for Export

Some of our products listed in this catalog may require speciﬁc procedures for export according to“U.S. Export

Administration Regulations”,“Foreign Exchange and Foreign Trade Control Law”of Japan, and other applicable

regulations. Should you have any questions on this matter, please contact our sales staff.

RADIAL LEADED INDUCTORS

WAVE

■PARTS NUMBER

*Operating Temp. : -25～+105℃（Including self-generated heat）

△＝Blank space

△ △ △

H △ L △

①

②

③

④

⑤

⑥

⑦

①Series name

Code

⑤Nominal inductance

Series name

Code

（example）

Nominal inductance［μH］

LH△

Radial leaded inductor

1R0

1.0

②Characteristics

150

102

Code

L△

Characteristics

1000

Standard type Taping available

High current type

※R＝Decimal point

⑥Inductance tolerance

Code

Inductance tolerance

±5％

③Dimensions（D）

Code

Dimensions（D）［mm max.］

±10％

9.0

／

±20％

11.0

±30％

④Packaging

⑦Internal code

Code

Packaging

Bulk（LHL）

Internal code

Standard

△△△

Ammo packaging（LHL）

■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY

LHL /LHLC

H₂

ℓ

Standard quantity [pcs]

Bulk

Type

LH L 08

H₂

ℓ

φd

Box

－

Taping

9.0 max

（0.354 max）

11.0 max

9.5 max

（0.374 max）

14.0 max

5.0±1.0

（0.197±0.039）

5.0±1.0

（0.197±0.039）

5.0±1.0

0.6±0.05

（0.024±0.002）

0.6±0.05

100

1000

500

LH LC08

LH L 10

LH LC10

－

（0.433 max）

（0.551 max）

（0.197±0.039）

（0.024±0.002）

Unit：mm（inch）

▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspeciﬁcationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspeciﬁcationꢀsheets.ꢀ

ꢀ

Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ

108

■PARTS NUMBER

●LHL08

Self-resonant

frequency

［MHｚ］（min..）

Nominal inductance

［μH］

Inductance

tolerance

（min.）

DC Resistance

［Ω］（max.）

Rated current

［A］（max.）

Measuring frequency

［MHz］

Parts number

EHS

LH L 08[]1R0N

LH L 08[]1R5M

LH L 08[]2R2M

LH L 08[]2R7M

LH L 08[]3R3M

LH L 08[]3R9M

LH L 08[]4R7M

LH L 08[]5R6M

LH L 08[]6R8M

LH L 08[]8R2M

LH L 08[]100K

LH L 08[]120K

LH L 08[]150K

LH L 08[]180K

LH L 08[]220K

LH L 08[]270K

LH L 08[]330K

LH L 08[]390K

LH L 08[]470K

LH L 08[]560K

LH L 08[]680K

LH L 08[]820K

LH L 08[]101K

LH L 08[]121K

LH L 08[]151K

LH L 08[]181K

LH L 08[]221K

LH L 08[]271K

LH L 08[]331K

LH L 08[]391K

LH L 08[]471K

LH L 08[]561K

LH L 08[]681K

LH L 08[]821K

LH L 08[]102J

LH L 08[]122J

LH L 08[]152J

LH L 08[]182J

LH L 08[]222J

LH L 08[]272J

LH L 08[]332J

LH L 08[]392J

LH L 08[]472J

LH L 08[]562J

LH L 08[]682J

LH L 08[]822J

LH L 08[]103J

LH L 08[]123J

LH L 08[]153J

LH L 08[]183J

LH L 08[]223J

LH L 08[]273J

LH L 08[]333J

RoHS

1.0

1.5

±30％

±20％

±10％

±5％

0.013

0.014

0.017

0.019

0.021

0.024

0.025

0.028

0.030

0.034

0.041

0.044

0.053

0.060

0.068

0.091

0.10

0.12

0.15

0.17

0.20

0.22

0.32

0.36

0.41

0.66

0.73

0.85

0.97

1.1

4.7

4.4

7.96

2.2

4.1

7.96

2.7

3.5

7.96

3.3

3.2

7.96

3.9

3.1

7.96

4.7

3.0

7.96

5.6

2.9

7.96

6.8

2.8

7.96

8.2

2.5

7.96

2.4

2.52

2.3

2.52

2.0

2.52

1.9

2.52

1.8

2.52

1.5

2.52

8.8

8.4

8.2

7.9

7.0

6.5

5.7

5.2

4.7

4.2

3.7

3.5

3.2

2.9

2.4

2.2

2.0

1.6

1.5

1.4

1.3

1.2

1.1

1.0

0.85

0.78

0.68

0.62

0.61

0.60

0.48

0.44

0.35

0.30

0.28

0.25

0.23

1.4

2.52

1.3

2.52

1.2

2.52

1.1

2.52

1.0

2.52

0.90

0.79

0.70

0.64

0.60

0.53

0.51

0.44

0.41

0.38

0.35

0.32

0.30

0.25

0.22

0.20

0.19

0.16

0.15

0.14

0.11

0.10

0.093

0.092

0.084

0.070

0.064

0.051

0.048

0.044

0.042

0.040

2.52

／

100

120

150

180

220

270

330

390

470

560

680

820

1000

1200

1500

1800

2200

2700

3300

3900

4700

5600

6800

8200

10000

12000

15000

18000

22000

27000

33000

0.796

1.3

0.796

1.5

0.796

1.8

0.796

2.3

0.796

2.7

0.252

±5％

3.2

0.252

±5％

4.1

0.252

±5％

4.8

0.252

±5％

5.6

0.252

±5％

7.5

±5％

8.5

0.252

±5％

9.7

0.252

±5％

0.252

±5％

0.252

±5％

0.252

±5％

0.252

±5％

L：1kHz，ꢀQ：0.0796MHz

±5％

100

・ [] Please specify the packaging code. (TB: Taping, NB: Bulk)

ꢀ

Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ

109

■PARTS NUMBER

●LHL10

Self-resonant

frequency

［MHｚ］（min..）

Nominal inductance

［μH］

Inductance

tolerance

（min.）

DC Resistance

［Ω］（max.）

Rated current

［A］（max.）

Measuring frequency

［MHz］

Parts number

EHS

LH L 10[]3R3M

LH L 10[]3R9M

LH L 10[]4R7M

LH L 10[]5R6M

LH L 10[]6R8M

LH L 10[]8R2M

LH L 10[]100K

LH L 10[]120K

LH L 10[]150K

LH L 10[]180K

LH L 10[]220K

LH L 10[]270K

LH L 10[]330K

LH L 10[]390K

LH L 10[]470K

LH L 10[]560K

LH L 10[]680K

LH L 10[]820K

LH L 10[]101K

LH L 10[]121K

LH L 10[]151K

LH L 10[]181K

LH L 10[]221K

LH L 10[]271K

LH L 10[]331K

LH L 10[]391K

LH L 10[]471K

LH L 10[]561K

LH L 10[]681K

LH L 10[]821K

LH L 10[]102J

LH L 10[]122J

LH L 10[]152J

LH L 10[]182J

LH L 10[]222J

LH L 10[]272J

LH L 10[]332J

LH L 10[]392J

LH L 10[]472J

LH L 10[]562J

LH L 10[]682J

LH L 10[]822J

LH L 10[]103J

LH L 10[]123J

LH L 10[]153J

LH L 10[]183J

LH L 10[]223J

LH L 10[]273J

LH L 10[]333J

LH L 10[]393J

LH L 10[]473J

LH L 10[]563J

LH L 10[]683J

LH L 10[]823J

LH L 10[]104J

LH L 10[]124J

LH L 10[]154J

RoHS

3.3

3.9

±20％

±10％

±5％

0.019

0.022

0.024

0.025

0.028

0.031

0.034

0.038

0.042

0.046

0.061

0.069

0.078

0.085

0.093

0.10

0.12

0.13

0.18

0.25

0.29

0.40

0.44

0.50

0.56

0.62

0.84

0.93

1.0

4.2

4.1

7.96

4.7

4.0

7.96

5.6

3.8

7.96

6.8

3.4

7.96

8.2

3.3

7.96

3.2

2.52

2.8

2.52

2.6

2.52

9.2

2.4

2.52

8.6

2.1

2.52

7.1

2.0

2.52

6.8

1.9

2.52

6.7

1.8

2.52

6.2

1.7

2.52

5.2

1.6

2.52

4.9

1.5

2.52

4.7

1.4

2.52

100

3.8

1.2

0.796

120

3.2

1.0

0.796

150

2.9

0.95

0.80

0.75

0.70

0.68

0.63

0.57

0.52

0.48

0.42

0.41

0.33

0.30

0.29

0.25

0.24

0.21

0.20

0.19

0.17

0.16

0.15

0.12

0.11

0.090

0.081

0.075

0.060

0.056

0.053

0.050

0.036

0.035

0.033

0.031

0.030

0.028

0.796

180

2.6

0.796

／

220

2.3

0.796

270

2.1

0.796

330

2.0

0.796

390

1.8

0.796

470

1.7

560

1.5

0.796

680

1.4

0.796

820

1.3

1.4

0.796

1000

1200

1500

1800

2200

2700

3300

3900

4700

5600

6800

8200

10000

12000

15000

18000

22000

27000

33000

39000

47000

56000

68000

82000

100000

120000

150000

1.2

1.8

0.252

±5％

0.87

0.83

0.75

0.70

0.67

0.56

0.54

0.49

0.41

0.38

0.36

0.29

0.27

0.24

0.21

0.20

0.15

0.14

0.13

0.12

0.10

0.095

0.088

0.085

0.070

0.069

2.3

0.252

±5％

2.7

0.252

±5％

3.0

0.252

±5％

3.9

0.252

±5％

4.3

0.252

±5％

5.8

0.252

±5％

6.4

0.252

±5％

7.1

0.252

±5％

9.0

0.252

±5％

0.252

±5％

0.252

±5％

L：1kHz，ꢀQ：0.0796MHz

L：1kHz，ꢀQ：0.0252MHz

±5％

170

200

210

240

260

300

±5％

・ [] Please specify the packaging code. (TB: Taping, NB: Bulk)

ꢀ

Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ

110

■PARTS NUMBER

●LHLC08

Self-resonant

frequency

［MHｚ］（min..）

Nominal inductance

［μH］

Inductance

tolerance

（min.）

DC Resistance

［Ω］（max.）

Rated current

［A］（max.）

Measuring frequency

［MHz］

Parts number

EHS

LH LC08[]1R0N

LH LC08[]1R5M

LH LC08[]2R2M

LH LC08[]2R7M

LH LC08[]3R3M

LH LC08[]3R9M

LH LC08[]4R7M

LH LC08[]5R6M

LH LC08[]6R8M

LH LC08[]8R2M

LH LC08[]100K

LH LC08[]120K

LH LC08[]150K

LH LC08[]180K

LH LC08[]220K

LH LC08[]270K

LH LC08[]330K

LH LC08[]390K

LH LC08[]470K

LH LC08[]560K

LH LC08[]680K

LH LC08[]820K

LH LC08[]101K

LH LC08[]121K

LH LC08[]151K

LH LC08[]181K

LH LC08[]221K

LH LC08[]271K

LH LC08[]331K

LH LC08[]391K

LH LC08[]471K

LH LC08[]561K

LH LC08[]681K

LH LC08[]821K

LH LC08[]102J

LH LC08[]122J

LH LC08[]152J

LH LC08[]182J

LH LC08[]222J

LH LC08[]272J

LH LC08[]332J

LH LC08[]392J

LH LC08[]472J

LH LC08[]562J

LH LC08[]682J

LH LC08[]822J

LH LC08[]103J

LH LC08[]123J

LH LC08[]153J

LH LC08[]183J

LH LC08[]223J

LH LC08[]273J

LH LC08[]333J

RoHS

1.0

1.5

±30％

±20％

±10％

±5％

0.013

0.014

0.017

0.019

0.021

0.024

0.025

0.028

0.030

0.034

0.041

0.044

0.053

0.060

0.068

0.091

0.10

0.12

0.15

0.17

0.20

0.22

0.32

0.36

0.41

0.66

0.73

0.85

0.97

1.1

5.4

5.2

7.96

2.2

4.8

7.96

2.7

4.2

7.96

3.3

3.8

7.96

3.9

3.7

7.96

4.7

3.6

7.96

5.6

3.5

7.96

6.8

3.4

7.96

8.2

3.0

7.96

2.9

2.52

2.8

2.52

2.6

2.52

2.4

2.52

2.3

2.52

2.0

2.52

8.8

8.4

8.2

7.9

7.0

6.5

5.7

5.2

4.7

4.2

3.7

3.5

3.2

2.9

2.4

2.2

2.0

1.6

1.5

1.4

1.3

1.2

1.1

1.0

0.85

0.78

0.68

0.62

0.61

0.60

0.48

0.44

0.35

0.30

0.28

0.25

0.23

1.9

2.52

1.7

2.52

1.5

2.52

1.4

2.52

1.3

2.52

1.2

2.52

／

100

120

150

180

220

270

330

390

470

560

680

820

1000

1200

1500

1800

2200

2700

3300

3900

4700

5600

6800

8200

10000

12000

15000

18000

22000

27000

33000

1.0

0.796

0.96

0.88

0.71

0.66

0.63

0.59

0.55

0.49

0.47

0.44

0.38

0.35

0.31

0.29

0.26

0.23

0.21

0.19

0.18

0.16

0.15

0.14

0.13

0.11

0.084

0.068

0.066

0.057

0.054

0.053

0.796

1.3

0.796

1.5

0.796

1.8

0.796

2.3

0.796

2.7

0.252

±5％

3.2

0.252

±5％

4.1

0.252

±5％

4.8

0.252

±5％

5.6

0.252

±5％

7.5

±5％

8.5

0.252

±5％

9.7

0.252

±5％

0.252

±5％

0.252

±5％

0.252

±5％

0.252

±5％

L：1kHz，ꢀQ：0.0796MHz

±5％

100

・ [] Please specify the packaging code. (TB: Taping, NB: Bulk)

ꢀ

Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ

111

■PARTS NUMBER

●LHLC10

Self-resonant

frequency

［MHｚ］（min..）

Nominal inductance

［μH］

Inductance

tolerance

（min.）

DC Resistance

［Ω］（max.）

Rated current

［A］（max.）

Measuring frequency

［MHz］

Parts number

EHS

LH LC10[]3R3M

LH LC10[]3R9M

LH LC10[]4R7M

LH LC10[]5R6M

LH LC10[]6R8M

LH LC10[]8R2M

LH LC10[]100K

LH LC10[]120K

LH LC10[]150K

LH LC10[]180K

LH LC10[]220K

LH LC10[]270K

LH LC10[]330K

LH LC10[]390K

LH LC10[]470K

LH LC10[]560K

LH LC10[]680K

LH LC10[]820K

LH LC10[]101K

LH LC10[]121K

LH LC10[]151K

LH LC10[]181K

LH LC10[]221K

LH LC10[]271K

LH LC10[]331K

LH LC10[]391K

LH LC10[]471K

LH LC10[]561K

LH LC10[]681K

LH LC10[]821K

LH LC10[]102J

LH LC10[]122J

LH LC10[]152J

LH LC10[]182J

LH LC10[]222J

LH LC10[]272J

LH LC10[]332J

LH LC10[]392J

LH LC10[]472J

LH LC10[]562J

LH LC10[]682J

LH LC10[]822J

LH LC10[]103J

LH LC10[]123J

LH LC10[]153J

LH LC10[]183J

LH LC10[]223J

LH LC10[]273J

LH LC10[]333J

LH LC10[]393J

LH LC10[]473J

LH LC10[]563J

LH LC10[]683J

LH LC10[]823J

LH LC10[]104J

LH LC10[]124J

LH LC10[]154J

RoHS

3.3

3.9

±20％

±10％

±5％

0.019

0.022

0.024

0.025

0.028

0.031

0.034

0.038

0.042

0.046

0.061

0.069

0.078

0.085

0.093

0.10

0.12

0.13

0.18

0.25

0.29

0.40

0.44

0.50

0.56

0.62

0.84

0.93

1.0

5.0

4.8

7.96

4.7

7.96

5.6

4.5

7.96

6.8

4.1

7.96

8.2

3.9

7.96

3.6

2.52

3.4

2.52

3.2

2.52

9.2

3.0

2.52

8.6

2.8

2.52

7.1

2.7

2.52

6.8

2.6

2.52

6.7

2.4

2.52

6.2

2.3

2.52

5.2

2.1

2.52

4.6

2.0

2.52

4.7

1.8

2.52

100

3.8

1.5

0.796

120

3.2

1.3

0.796

150

2.9

1.2

0.796

180

2.6

1.0

0.796

／

220

2.3

0.97

0.90

0.86

0.75

0.65

0.61

0.57

0.50

0.48

0.40

0.37

0.36

0.32

0.30

0.26

0.25

0.24

0.21

0.20

0.18

0.14

0.13

0.11

0.10

0.095

0.076

0.068

0.065

0.061

0.045

0.043

0.041

0.038

0.037

0.035

0.796

270

2.1

0.796

330

2.0

0.796

390

1.8

0.796

470

1.7

560

1.5

0.796

680

1.4

0.796

820

1.3

1.4

0.796

1000

1200

1500

1800

2200

2700

3300

3900

4700

5600

6800

8200

10000

12000

15000

18000

22000

27000

33000

39000

47000

56000

68000

82000

100000

120000

150000

1.2

1.8

0.252

±5％

0.87

0.83

0.75

0.70

0.67

0.56

0.54

0.49

0.41

0.38

0.36

0.29

0.27

0.24

0.21

0.20

0.15

0.14

0.13

0.12

0.10

0.095

0.088

0.085

0.070

0.069

2.3

0.252

±5％

2.7

0.252

±5％

3.0

0.252

±5％

3.9

0.252

±5％

4.3

0.252

±5％

5.8

0.252

±5％

6.4

0.252

±5％

7.1

0.252

±5％

9.0

0.252

±5％

0.252

±5％

0.252

±5％

L：1kHz，ꢀQ：0.0796MHz

L：1kHz，ꢀQ：0.0252MHz

±5％

170

200

210

240

260

300

±5％

・ [] Please specify the packaging code. (TB: Taping, NB: Bulk)

ꢀ

Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ

112

RADIAL LEADED INDUCTORS

■PACKAGING

①Minimum Quantity

Standard quantity [pcs]

Type (EIA)

LHL 08

Bulk

100

Taped

1000

500

LHL 10

LHLC08

LHLC10

100

1000

500

②Bulk dimensions

●LHL08, LHL10

Dimensions

F^＊

Type

LHL08

φD（max）

9.0

H₂（max）

9.5

ℓ

φd

5.0±1.0

0.6±0.05

（0.354）

11.0

（0.374）

14.0

（0.197±0.039）

5.0±1.0

（0.197±0.039）

5.0±1.0

（0.024±0.002）

0.6±0.05

LHL10

（0.433）

（0.551）

（0.197±0.039）

（0.024±0.002）

Unit：mm（inch）

*Measured at the base of the leads.

LHL08

LHL10

φ11.0 max

φ9.0 max

H₁

（φ0.354 max）

30.5 max

（φ0.433 max）

34.0 max

（1.20 max）

（1.34 max）

18.0＋2.0/－0.0

（0.709＋0.079/－0.000）

9.5 max

18.0＋2.0/－0.0

（0.709＋0.079/－0.000）

14.0 max

H₂

（0.374 max）

12.7±1.0

（0.551 max）

12.7±1.0

（0.500±0.039）

12.7±0.3^※1

（0.500±0.039）

12.7±0.3^※1

P₀

P₁

P₂

（0.500±0.012）

3.85±0.7

（0.500±0.012）

3.85±0.7

（0.152±0.028）

6.35±1.3

（0.152±0.028）

6.35±1.3

（0.250±0.051）

5.0＋0.8/－0.2

（0.197＋0.031/0.008）

0.0±2.0

（0.250±0.051）

5.0＋0.8/－0.2

（0.197＋0.031/－0.008）

0.0±2.0

（0.0±0.079）

18.0＋1.0/－0.5

（0.709＋0.039/－0.020）

12.5 min

（0.0±0.079）

18.0＋1.0/－0.5

（0.709＋0.039/－0.020）

12.5 min

W₀

W₁

W₂

D₀

φd

（0.492 min）

9.0±0.5

（0.354±0.020）

3.0 max^※2

（0.354±0.020）

3.0 max^※2

（0.118 max）

φ4.0±0.2

（0.118 max）

φ4.0±0.2

（φ0.158±0.008）

φ0.6±0.05

（φ0.158±0.008）

φ0.6±0.05

（φ0.024±0.002）

0.6±0.3

（φ0.024±0.002）

0.6±0.3

（0.024±0.012）

Unit：mm（inch）

※1 Accumulated error for 20 pitches is 1mm.

※2 Bonding tape must not protrude from the base tape.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

i_leaded_LH_pack_e-E04R01

●LHLC08, LHLC10

Dimensions

F^＊

Type

LHLC08

φD（max）

9.0

H₂（max）

9.5

ℓ

φd

5.0±1.0

0.6±0.05

（0.354）

11.0

（0.374）

14.0

（0.197±0.039）

5.0±1.0

（0.197±0.039）

5.0±1.0

（0.024±0.002）

0.6±0.05

LHLC10

（0.433）

（0.551）

（0.197±0.039）

（0.024±0.002）

Unit：mm（inch）

*Measured at the base of the leads.

LHLC08

φ9.0max

LHLC10

φ11.0max

H₁

(φ0.354max）

30.5max

（φ0433max）

34.0max

（1.20max）

（1.34max）

18.0＋2.0/－0.0

（0.709＋0.079/－0.000）

9.5max

18.0＋2.0/－0.0

（0.709＋0.079/－0.000）

14.0max

H₂

（0.374max）

（0.551max）

12.7±1.0

（0.500±0.039）

12.7±0.3^※1

（0.500±0.039）

12.7±0.3^※1

P₀

P₁

P₂

（0.500±0.012）

3.85±0.7

（0.500±0.012）

3.85±0.7

（0.152±0.028）

6.35±1.3

（0.152±0.028）

6.35±1.3

（0.250±0.051）

5.0＋0.8/－0.2

（0.197＋0.031/－0.008）

0.0±2.0

（0.250±0.051）

5.0＋0.8/－0.2

（0.197＋0.031/－0.008）

0.0±2.0

（0.0±0.079）

18.0＋1.0/－0.5

（0.709＋0.039/－0.020）

12.5min

（0.0±0.079）

18.0＋1.0/－0.5

（0.709＋0.039/－0.020）

12.5min

W₀

W₁

W₂

D₀

φd

（0.492min）

9.0±0.5

（0.354±0.020）

3.0max^※2

（0.354±0.020）

3.0max^※2

（0.118max）

φ4.0±0.2

（φ0.158±0.008）

φ0.6±0.05

（φ0.158±0.008）

φ0.6±0.05

（φ0.024±0.002）

0.6±0.3

（φ0.024±0.002）

0.6±0.3

（0.024±0.012）

Unit：mm（inch）

※1 Accumulated error for 20 pitches is 1mm.

※2 Bonding tape must not protrude from the base tape.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

i_leaded_LH_pack_e-E04R01

AXIAL LEADED INDUCTORS（CAL Type）、

RADIAL LEADED INDUCTORS（LH Type）、

LEADED FERRITE BEAD INDUCTORS（ FB Series A Type／R Type）

■RELIABILITY DATA

1. Operating temperature Range

CAL45 Type

Specified Value

LHL□□□

FBA/FBR

－25～＋ 105℃

CAL45 Type

LHL□□□

FBA/FBR

Test Methods and

Remarks

Including self-generated heat

2. Storage temperature Range

CAL45 Type

Specified Value

－40～＋ 85℃（Except for taping condition）

LHL□□□

FBA/FBR

3. Rated current

Specified Value

CAL45 Type

LHL□□□

FBA/FBR

Within the specified tolerance

CAL45 Type :

The maximum DC value having inductance within 10% and temperature increase within 40℃ by the application of DC bias.

LHL□□□ :

The maximum DC value having inductance decrease within 10% (LHLC08, LHLC10：within 30%) and temperature increase within the

following specified temperature by the application of DC bias.

Test Methods and

Remarks

Reference temperature

: 25℃（LHL08, LHL10）

: 40℃（LHLC08, LHLC10）

FBA/FBR :

No disconnection or appearance abnormality by continuous current application for 30 min. Change after the application shall be

within ±20% of the initial value.

This is not guaranteed for electrical characteristics during current application.

4. Impedance

CAL45 Type

Specified Value

LHL□□□

FBA/FBR

Within the specified tolerance

FBA/FBR :

Test Methods and

Remarks

Measuring equipment

Measuring frequency

: Impedance analyzer (HP4191A) or its equivalent

: Specified frequency

5. Inductance

CAL45 Type

LHL□□□

FBA/FBR

Within the specified tolerance

Specified Value

CAL45 Type :

Measuring equipment

Measuring frequency

LHL□□□ :

: LCR meter (HP4285A + HP42851A or its equivalent)

: Specified frequency

Test Methods and

Remarks

Measuring equipment

: LCR meter (HP4285A＋HP42851A or its equivalent)

: LCR meter (HP4263A) or its equivalent (at 1kHz)

: Specified frequency

Measuring frequency

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

i_leaded_reli_e-E06R01

6. Q

CAL45 Type

LHL□□□

FBA/FBR

Specified Value

Within the specified tolerance

LHL□□□

Test Methods and

Remarks

Measuring equipment

: LCR meter (HP4285A＋HP42851A or its equivalent)

: LCR meter (HP4263A) or its equivalent (at 1kHz)

: Specified frequency

Measuring frequency

7. DC Resistance

Specified Value

CAL45 Type

LHL□□□

FBA/FBR

Within the specified tolerance

Test Methods and

Remarks

Measuring equipment

: DC ohmmeter

8. Self resonance frequency

CAL45 Type

Specified Value

LHL□□□

FBA/FBR

Within the specified tolerance

Test Methods and LHL□□□

Remarks

Measuring equipment

: (HP4191A, 4192A) its equivalent

9. Temperature characteristic

CAL45 Type

LHL□□□

FBA/FBR

Specified Value

△L/L : Within ±7%

Change of maximum inductance deviation in step 1 to 5

Temperature (℃)

Step

LHL□□□

Test Methods and

Remarks

Minimum operating temperature

20 (Standard temperature)

Maximum operating temperature

10. Tensile strength test

CAL45 Type

LHL□□□

FBA/FBR

Specified Value

No abnormality such as cut lead, or looseness.

CAL45 Type : Apply the stated tensile force progressively in the direction to draw terminal.

force (N)

duration (s)

LHL□□□ : Apply the stated tensile force progressively in the direction to draw terminal.

Test Methods and

Remarks

Nominal wire diameter tensile φd (mm)

0.3＜φd≦0.5

force (N)

duration (s)

0.5＜φd≦0.8

30±5

0.8＜φd≦1.2

FBA/FBR : The body of a component shall be fixed and a tensile force of 20±1N shall be applied to the lead wire in the

of the component during 10±1 seconds.

axial direction

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

i_leaded_reli_e-E06R01

11. Over current

Specified Value

CAL45 Type

LHL□□□

FBA/FBR

No emission of smoke no firing.

There shall be no scorch or short of wire.

LHLC08, LHLC10 : There shall be no firing.

LHL□□□・CAL45 Type ：

Measuring current

Duration

Test Methods and

Remarks

: Rated current×2

: 5 min.

: one time

Number of measuring

12. Terminal strength : bending

CAL45 Type

Specified Value

LHL□□□

FBA/FBR

No abnormality such as cut lead, or looseness.

CAL45 Type :

Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the

initial position. This operation is done over a period of 2-3 sec. Then second bend in the opposite direction shall be made.

Number of bends : Two times.

Nominal wire diameter

tensile

Mass reference

weight

Bending force

0.3＜ φ d≦0.5

0.5＜ φ d≦0.8

2.5

0.25

0.50

Test Methods and

Remarks

LHL□□□・FBA/FBR :

Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the

initial position. This operation is done over a period of 2-3 sec. Then second bend in the opposite direction shall be made.

Number of bends : Two times.

Nominal wire diameter

tensile

Mass reference

Bending force

weight

0.25

0.5

0.3＜φd≦0.5

0.5＜φd≦0.8

0.8＜φd≦1.2

2.5

1.0

13. Insulation resistance : between the terminals and body

CAL45 Type

Specified Value

LHL□□□

FBA/FBR

100MΩmin.

LHL□□□ :

Applied voltage

Duration

Test Methods and

Remarks

: 500 VDC

: 60 sec.

14. Insulation resistance : between terminals and core

CAL45 Type

Specified Value

LHL□□□

FBA/FBR

1MΩmin.

FBA/FBR :

Applied voltage

Duration

Test Methods and

Remarks

: 100 VDC

: 60±5 sec.

15. Withstanding : between the terminals and body

CAL45 Type

Specified Value

LHL□□□

FBA/FBR

No abnormality such as insulation damage

LHL□□□ :

According to JIS C5101-1.

Metal global method

Test Methods and

Remarks

Applied voltage

Duration

: 500 VDC

: 60 sec.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

i_leaded_reli_e-E06R01

16. DC bias characteristic

CAL45 Type

△L/L : Within －10%

Specified Value

LHL□□□

FBA/FBR

Test Methods and

Remarks

CAL45 Type : Measure inductance with application of rated current using LCR meter to compare it with the initial value.

17. Body strength

Specified Value

CAL45 Type

LHL□□□

FBA/FBR

No abnormality as damage.

No abnormality such as cracks on body.

CAL45 Type :

Applied force

Duration

:50N

: 10 sec.

Speed

: Shall attain to specified force in 2 sec.

FBA :

Applied force : 50±3N

Duration : 30±1 sec.

Test Methods and

Remarks

18. Resistance to vibration

CAL45 Type

△L/L : Within ±5%

Appearance : No abnormality

△L/L : Within ±5%

LHL□□□

FBA/FBR

Specified Value

Q change : Within ±30%

Appearance : No abnormality

Impedance change : Within ±20%

CAL45 Type :

Directions

: 2 hrs each in X, Y and Z directions total : 6hrs.

Frequency range

Amplitude

: 10 to 55 to 10Hz (1min.)

: 1.5mm

Mounting method

Recovery

: Soldering onto printed board.

Test Methods and

Remarks

: At least 1hr of recovery under the standard condition after the test, followed by the measurement within 2hrs.

LHL□□□・FBA/FBR :

Directions

: 2 hrs each in X, Y and Z directions total : 6hrs.

: 10 to 55 to 10Hz (1min.)

: 1.5mm

Frequency range

Amplitude

Mounting method

: Soldering onto printed board.

19. Resistance to shock

CAL45 Type

No significant abnormality in appearance

Specified Value

LHL□□□

FBA/FBR

CAL45 Type :

Drop test

Test Methods and

Remarks

Impact material

Height

: concrete or vinyl tile

: 1m

Total number of drops

: 10 times

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

i_leaded_reli_e-E06R01

20. Solderability

Specified Value

CAL45 Type

LHL□□□

FBA/FBR

At least 75％ of terminal electrode is covered by new solder.

At least 90％ of terminal electrode is covered by new solder.

CAL45 Type :

Solder temperature

Duration

: 230±5℃

: 2±0.5 sec.

LHL□□□ :

Solder temperature

Duration

: 235±5℃

Test Methods and

Remarks

: 2±0.5 sec.

Immersion depth

FBA/FBR :

: Up to 1.5mm from bottom of case.

Solder temperature

Duration

: 230±5℃

: 3±1 sec.

Immersion depth

: Up to 1.5mm from terminal root.

21. Resistance to soldering heat

CAL45 Type

△L/L : Within ±5%

No significant abnormality in appearance

Inductance change : Within ±5%

Q change : Within ±30%

LHL□□□

Specified Value

No significant abnormality in appearance

Impedance change : Within ±20%

FBA/FBR

CAL45 Type :

Solder temperature

: 270±5℃

Duration

: 5±0.5 sec. One time

Immersed conditions

Recovery

: Inserted into substrate with t=1.6mm

: At least 1hr of recovery under the standard condition after the test, followed by the measurement within

2hrs.

LHL□□□ :

Solder bath method :

Solder temperature

Duration

: 260±5℃

: 10±1 sec.

: Up to 1.5mm from the bottom of case.

: 350±10℃ (At the tip of soldering iron)

: 5±1 sec.

Manual soldering :

Solder temperature

Duration

Test Methods and

Remarks

: Up to 1.5mm from the bottom of case.

: No excessive pressing shall be applied to terminals.

: 1 to 2hrs of recovery under the standard condition after the test.

Caution

Recovery

FBA/FBR :

Solder bath method:

Condition 1:

Solder temperature

Duration

: 260±5℃

: 10±1 sec.

Immersion depth

Solder temperature

Duration

: Up to 1.5mm from the terminal root.

: 350±5℃

: 3±1 sec.

Condition 2 :

Immersion depth

Recovery

: Up to 1.5mm from the terminal root.

: 3hrs of recovery under the standard condition after the test.

22. Resistance to solvent

CAL45 Type

Please avoid the ultrasonic cleaning of this product.

LHL□□□

FBA/FBR

Specified Value

No significant abnormality in appearance

Impedance change : Within ±20%

FBA/FBR :

Solvent temperature

Duration

: 20～25℃

: 30±5 sec.

: Acetone

Test Methods and

Remarks

Solvent type

Recovery

: 3hrs of recovery under the standard condition after the test.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

i_leaded_reli_e-E06R01

23. Thermal shock

Specified Value

CAL45 Type

LHL□□□

△L/L : Within ±10%

Appearance : No abnormality

Inductance change : Within ±10%

Q change : Within ±30%

Appearance : No abnormality

FBA/FBR

Impedance change : Within ±20%

CAL45 Type：Conditions for 1cycle

Step

Temperature (℃)

－25＋0/－3

Duration (min.)

30±3

Room temperature

＋85＋2/－0

Within 3

30±3

Room temperature

Within 3

Number of cycles

Recovery

: 5 cycles

: At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the

measurement within 2hrs.

Test Methods and

Remarks

LHL□□□・FBA/FBR： According to JIS C60068-2-14.

Conditions for 1 cycle

Step

Temperature (℃)

Minimum operating temperature

Room temperature

Duration (min.)

30±3

Within 3

30±3

Maximum operating temperature

Room temperature

Within 3

Number of cycles

Recovery

: 10 cycles 〔LHL□□□〕

: 5 cycles (FBA/ FBR)

: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber. 〔LHL□□□〕

: 3hrs of recovery under the standard condition after the removal from the test chamber. (FBA/ FBR)

24. Damp heat

Specified Value

CAL45 Type

LHL□□□

△L/L : Within ±10%

Appearance：No abnormality

FBA/FBR

Impedance change：Within ±20%

CAL45 Type :

Temperature

Humidity

: 40±2℃

: 90～95%RH

Duration

: 1000 hrs

Test Methods and

Remarks

Recovery

FBA/FBR :

Temperature

Humidity

: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.

: 60±2℃

: 90～95%RH

: 1000 hrs

Duration

Recovery

: 3hrs of recovery under the standard condition after the removal from the test chamber.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

i_leaded_reli_e-E06R01

25. Loading under damp heat

CAL45 Type

△L/L : Within ±10%

Appearance : No abnormality

Inductance change : Within ±10%

Q change : Within ±30%

Specified Value

LHL□□□

FBA/FBR

CAL45 Type :

Temperature

Humidity

: 40±2℃

: 90～95%RH

: 1000 hrs

Duration

Applied current

Recovery

: Rated current

Test Methods and

Remarks

: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.

LHL□□□ :

Temperature

Humidity

: 40±2℃

: 90～95%RH

Duration

: 1000＋48/-0 hrs

Applied current

Recovery

: Rated current

: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.

26. Loading at high temperature

CAL45 Type

△L/L : Within ±10%

Specified Value

LHL□□□

FBA/FBR

CAL45 Type :

Temperature

Duration

: 85±2℃

Test Methods and

Remarks

: 1000 hrs

Applied current

Recovery

: Rated current

: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.

27. Low temperature life test

CAL45 Type

△L/L : Within ±10%

Appearance : No abnormality

Inductance change : Within ±10%

Q change : Within ±30%

Specified Value

LHL□□□

FBA/FBR

CAL45 Type :

Temperature

Duration

: －25±2℃

: 1000 hrs

Test Methods and

Remarks

Recovery

: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.

LHL□□□ :

Temperature

Duration

:－40±3℃

: 1000＋48/-0 hrs

Recovery

: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.

28. High temperature life test

CAL45 Type

Appearance : No abnormality

Inductance change : Within ±10%

Q change : Within ±30%

Specified Value

LHL□□□

FBA/FBR

LHL□□□ :

Temperature

Duration

Test Methods and

Remarks

: 105±2℃

: 1000＋48/-0 hrs

Recovery

: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

i_leaded_reli_e-E06R01

AXIAL LEADED INDUCTORS（CAL Type）、

RADIAL LEADED INDUCTORS（LH Type）、

LEADED FERRITE BEAD INDUCTORS（FB Series A Type／R Type）

■PRECAUTIONS

1. Circuit Design

◆Operating environment

1. The products described in this specification are intended for use in general electronic equipment,(office supply equipment,

telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical

Precautions

equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear

control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or

damage. For such uses, contact TAIYO YUDEN Sales Department in advance.

2. PCB Design

◆Design

Precautions

1. Please design insertion pitches as matching to that of leads of the component on PCBs.

◆Design

Technical

1. When Inductors are mounted onto a PC board, hole dimensions on the board should match the lead pitch of the component, if not, it will

considerations

cause breakage of the terminals or cracking of terminal roots covered with resin as excess stress travels through the terminal legs.

3. Considerations for automatic placement

◆Adjustment of mounting machine

Precautions

1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.

2. Mounting and soldering conditions should be checked beforehand.

Technical

◆Adjustment of mounting machine

considerations

1. When installing products, care should be taken not to apply distortion stress as it may deform the products.

4. Soldering

◆Wave soldering

1. Please refer to the specifications in the catalog for a wave soldering.

2. Do not immerse the entire inductor in the flux during the soldering operation.

◆Lead free soldering

1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering

heat, soldering etc sufficiently.

Precautions

◆Recommended conditions for using a soldering iron:

・Put the soldering iron on the land-pattern.

・Soldering iron's temperature - Below 350℃

・Duration - 3 seconds or less

・The soldering iron should not directly touch the inductor.

◆Reflow soldering

1. As for reflow soldering, please contact our sales staff.

◆Lead free soldering

1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently

degrade the reliability of the products.

Technical

considerations

◆Recommended conditions for using a soldering iron

If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade

the reliability of the products.

5. Cleaning

Precautions

◆Cleaning conditions

1. CAL type, LH type

Please do not do cleaning by a supersonic wave.

◆Cleaning conditions

Technical

considerations

1. CAL type, LH type,

If washing by supersonic waves, supersonic waves may deform products.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

i_leaded_prec_e-E02R01

6. Handling

◆Handling

1. Keep the inductors away from all magnets and magnetic objects.

◆Mechanical considerations

1. Please do not give the inductors any excessive mechanical shocks.

2. LH type

Precautions

If inductors are dropped onto the floor or a hard surface they should not be used.

◆Packing

1. Please do not give the inductors any excessive mechanical shocks.

In loading, please pay attention to handling indication mentioned in a packing box (a loading direction / number of maximum loading /

fragile item).

◆Handling

1. There is a case that a characteristic varies with magnetic influence.

◆Mechanical considerations

Technical

1. There is a case to be damaged by a mechanical shock.

2. LH type

considerations

There is a case to be broken by a fall.

◆Packing

1. There is a case that a lead wire could be deformed by a fall or an excessive shock.

7. Storage conditions

◆Storage

1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the

storage area should be controlled.

Recommended conditions

・Ambient temperature 0～40℃

Precautions

・Humidity Below 70% RH

The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may

decrease as time passes.

For this reason, inductors should be used within one year from the time of delivery.

In case of storage over 6 months, solderability shall be checked before actual usage.

◆Storage

Technical

1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes

and deterioration of taping/packaging materials may take place.

considerations

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

i_leaded_prec_e-E02R01

LHL10NB682J [TAIYO YUDEN]

相关型号：

LHL10NB682K

LHL10NB682M

LHL10NB683J

LHL10NB683M

LHL10NB6R8M

LHL10NB6R8N

LHL10NB820J

LHL10NB820K

LHL10NB820M

LHL10NB820N

LHL10NB821J

LHL10NB821K